Sliding door roller replacement costs $149 to $299 per panel and takes about 45 minutes. We carry rollers for all major brands on the truck. If your door sticks, drags, or grinds, worn rollers are almost always the cause. Call Treasure Coast Sliding Door Repair at (772) 207-4146 for same-day service.
How to tell if your sliding door rollers are worn out.
Sliding door rollers take a beating. Every time you open and close the door, the wheels spin along the track carrying 80 to 200 pounds of glass and frame. Over time the bearings wear down, the wheels crack or flatten, and the door stops moving the way it should. Here on the Treasure Coast, salt air and humidity speed this up even more. We see rollers fail in 5 to 8 years on barrier island homes in Hutchinson Island and Jensen Beach, compared to 10 to 15 years inland.
Door Sticks or Drags
The door requires serious force to open or close. You have to lift and push at the same time.
Grinding or Scraping Noise
Metal on metal sound when the door moves. Means the wheel bearings are shot or the wheel is cracked.
Door Jumps Off Track
The door lifts out of the track or wobbles side to side. Flat or broken rollers lose their grip.
Gaps at the Bottom
Visible daylight, water, or bugs coming in under the door. Rollers have worn down and the panel sits too low.
Difficulty Locking
The lock does not line up anymore. When rollers wear unevenly, the door sits crooked and the latch misses the strike plate.
Door Feels Heavy
A properly rolling door should glide with one finger. If it feels heavy, the rollers are not doing their job.
This is what worn rollers look like
These rollers came out of a 10-year-old door in Jensen Beach. The salt air corroded the bearings and the wheels were completely flat. New rollers brought the door back to a one-finger glide.
If you notice any of these, do not wait. A stuck door puts extra stress on the track and frame, which turns a $149 roller job into a $400+ repair. Call us at (772) 207-4146 and we can usually get to you the same day.
How we replace your sliding door rollers.
Roller replacement is straightforward when you have done it 3,500+ times. Here is exactly what happens when our tech arrives at your home.
Inspect and Diagnose
We check the door, track, rollers, lock, and frame. Sometimes the issue is rollers plus a bent track or misaligned lock. We tell you everything before starting.
Remove the Door Panel
We lift the panel off the track and set it on padded supports. This takes two people on heavier doors. We protect your flooring.
Swap the Rollers
Old rollers come out. New ones go in, matched to your door brand and weight rating. We carry most common sizes on the truck.
Reinstall and Test
Panel goes back on the track. We adjust roller height for smooth glide, check lock alignment, clean the track, and test the door multiple times.
We match the roller to your door
Every door brand uses a different roller size and weight rating. We carry rollers for Andersen, PGT, Pella, Milgard, and most builder-grade doors on our truck. No second trips.
Roller Replacement Pricing
* Estimated labor costs. Parts and materials may be additional. We quote the exact price before starting.
Price includes parts and labor. Standard rollers are at the lower end. Heavy-duty tandem rollers for large or impact-rated doors are at the higher end. We always confirm the exact price before we start. No surprises, no hidden fees. If the track needs attention too, we will quote that separately so you can decide.
The adjustment makes the difference
New rollers are only half the job. Setting the correct height so the door glides level, the lock engages, and the weatherstrip seals properly is what separates a good repair from a great one.
Rollers for every major sliding door brand.
We carry replacement rollers for all the brands you will find in Treasure Coast homes. Builder-grade doors from new construction in Port St. Lucie, premium brands in Vero Beach condos, and everything in between. If your door has rollers, we can replace them.
Not sure what brand your door is? No problem. We identify it on site and match the correct rollers. You do not need to know the model number before calling.
We protect your home during every job
Your door panel comes off the track and goes onto padded supports. We protect your floors, your frame, and the glass. When we're done, we clean up completely. You won't know we were there except your door works again.
Serving the entire Treasure Coast.
Treasure Coast Sliding Door Repair does roller replacements across Stuart, Port St. Lucie, Jensen Beach, Fort Pierce, Vero Beach, Palm City, Hutchinson Island, Hobe Sound, Port Salerno, and Indiantown. That covers all of Martin County, St. Lucie County, and Indian River County. Most appointments are same-day or next-day. For emergencies, we can often get there within a few hours.